Your cart is empty.

(NEW) ZAR® Deck & Siding Solid Color Coating

ZAR® Solid Color Deck & Siding Coating offers full color and coverage that shows wood texture without grain.


Please note, colors are RGB web approximations of the actual shades.


Additional colors obtained with tint. Visit your local ZAR® dealer for more information.
Please note, colors are RGB web approximations of the actual shades.

Currently out of stock. Select another size or find your local dealer.

See Return Policy
Shipping included. Taxes not included.
Regional shipping restrictions may apply.

Screenshot of visualizer

Deck and Siding Visualizer

Mix and match deck and siding colors and finishes to find the right look.

Product Overview

Combines the opacity of paint with the penetrative properties of stain. This innovative formula embraces self-crosslinking Core-Shell Technology with a performance enhancing Urethane to yield a material with unmatched performance in durability, adhesion, weatherability, and color retention

Coats: 2

Clean up: Soap and water

Coverage: 100 – 400 square feet per gallon

Dry Time: 30 minutes to touch and 30 minutes to recoat. Full Cure: 24 hours

Warranty: 5 years deck / 15 years siding

  • Self cross-linking, core shell latex for superior adhesion.
  • Broad spectrum preservative for outstanding mold & mildew protection.
  • Fortified with Aliphatic Urethane for increased durability.
Click to expand / collapse
  • Wood
  • T‑111
  • Fiber-cement
  • Composite decking
  • Masonry
  • Metal
ZAR® Deck & Siding Solid Color Coating
What is ZAR® Deck & Siding Solid Color Coating?
ZAR  Decking & Siding Protecting Your Wood Deck
ZAR® Deck & Siding: Protecting Your Wood Deck

Surface must be clean, dry and in good condition. Remove all mildew, dirt, loose wood fibers, paint flakes, oil and grease. Repair or replace any loose, cracked or warped boards. 

All mildew (dark, fuzzy or powdery deposits) must be removed with a wood cleaner or the following solution: 13 cup heavy-duty laundry detergent to 1 quart household bleach to 3 quarts of warm water. Apply with a scrubbing brush. Rinse thoroughly and allow to dry before staining. Wear protective eye goggles and waterproof gloves when handling solution.

DECK NOTE: Do not apply over clear finishes. Do not pre-treat or use a water-repellent preservative. Test the wood for factory treatment by sprinkling a few drops of water on the surface. If water is readily absorbed into the wood, proceed. If not, DONOT apply ZAR® Deck & Siding Solid Color Stain. Wait five months and then retest.

Previously painted or Stained Wood
Clean previously painted surface thoroughly. Remove all loose or flaking paint by scraping. Sand glossy paint surfaces to improve adhesion.


Apply only when air and surface temperatures are between 40oF (4oC) and 95oF(35oC). DO NOT THIN. STIR THOROUGHLY before and during application. Do not apply if rain is expected within 24 hours. Apply using a brush, roller, foam pad applicator or by spray. If spraying, the coating should be dry brushed or back rolled for color uniformity. Apply 2 coats. Avoid applying in direct sunlight. May be sprayed, but application with a synthetic brush is recommended. Be sure to maintain a wet edge when applying.

Clean Up
Clean application tools immediately after use with warm soapy water.


Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.


UGL, makers of ZAR Deck & Siding Stain, warrants, subject to the limitations set forth herein, that this product, under normal use and proper storage, will be free from defects in material or workmanship and merchantable for a period of five (5) years on Decks and fifteen (15) years on Siding from the original date of purchase. This limited warranty extends to the original consumer purchaser of the product only and is non-transferable. If this product is found to be defective by UGL within the warranty period, you will receive a replacement of the product or, at UGL’s option, a full refund of the purchase price upon presentation of proof of purchase (original sales receipt). This limited warranty excludes failure to apply the product to a properly prepared bare surface in accordance with UGL’s instructions provided with this product. UGL MAKES NO FURTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY EXCLUDES (1) LABOR AND ALL OTHER COSTS ASSOCIATED WITH THE APPLICATION OR REMOVAL OF THE PRODUCT OR ANY PLACEMENT PRODUCT, AND (2) ANY INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the limitation or exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This limited warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. To make a warranty claim please contact (with proof of purchase) the store where you purchased the product or contact UGL directly at 1−800−848−7253 (Consumer Hotline) or by mail at UGL Consumer Inquiry Department, P.O. Box 70, Scranton PA 18501 – 0070.

USAGE STATEMENT: Prior to use, carefully read the product label and follow the directions. For technical information, warnings, cautions, notices, and additional information, download and read the documentation available on this website.

California Residents: Prop 65 WARNING(S)

* WARNING: If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1 – 800-424-LEAD or visit www​.epa​.gov/lead.

Not sure how much you need new

Not sure how much product you need?