Cart

Subtotal
Total

ZAR® Trowelable Wood Patch

ZAR® Trowelable Wood Patch


Color:

Please note, colors are RGB web approximations of the actual shades.

Currently out of stock. Select another size or find your local dealer.

Shipping included. Taxes not included.

Regional shipping restrictions may apply.

Not sure how much you need new

Not sure how much product you need?

Product Overview

ZAR® Trowelable Wood Patch is a low-odor, ready-to-use latex patching compound for floors. ZAR® Trowelable Wood Patch’s creamy, easy-to-stand formula fills open-grain and nail holes, and repairs cracks, gouges, and minor blemishes on wood floors. When a patched area requires stain, the natural color of this product greatly diminishes the lighter area or halo” effect around the patch that’s typically present with other wood fillers.

Coats: varies

Clean Up: Water

Coverage: 429 In3 per 3.5 gallon

Dry Time: 1 hour 30 minutes, 2 hour set time

  • Latex base
  • Available in red oak, and white oak
  • Application with non-metallic, smooth edge finishing trowel
  • Tintable
  • May be sanded, nailed, sawed, drilled, painted, varnished, shellacked, polyurethaned, or stained
  • Water mixable
Click to expand / collapse
Surfaces
  • Wood
Preparation

Remove all dirt, grease, oil, and loose particles from the patch area.* Dampen surfaces to be patched with water. Do not use when material and/​or air temperature is below 50°F.

Application

Pour ZAR® Trowelable Wood Patch on the floor surface. Using a non-metallic, smooth edge finishing trowel, spread the wood patch across the entire surface. Be sure to press ZAR® Trowelable Wood Patch into the surface to fill all the cracks. The surface may be sanded after 1 hour. Deep areas should be filled in layers, allowing each layer to dry between applications. Sand after the last layer has completely dried. Final sanding should remove all ZAR® Trowelable Wood Patch from the surface of the wood, leaving the patch only in the surface cracks and nail holes. Allow the patch to dry overnight before applying an oil-based stain, and wait 1.5 to 2 hours before applying latex paint.

Disposal

Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.

USAGE STATEMENT: Prior to use, carefully read the product label and follow the directions. For technical information, warnings, cautions, notices, and additional information, download and read the documentation available on this website.

California Residents: Prop 65 WARNING(S)

* WARNING: If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1 – 800-424-LEAD or visit www​.epa​.gov/lead.