UGL® 222 Spackling Paste
222 Spackling Paste can be used for patching interior and exterior cracked plaster, filling nail holes, and smoothing surface imperfections on unprimed wood. As mixing is not required, there’s no leftover product to discard when you’re finished. Simply open the package and get started, being sure to follow the directions. UGL® 222 Spackling Paste will save you time, is budget-friendly, builds up without sagging, and sands easily.
Coverage: 56 In³ per quart
Set time: 2 hours
- Patches cracked plaster, fills nail holes, repairs wall tile and smooths surface imperfections on unprimed wood
- Dust control formula
- Latex base
- Nail holes
- Wall tile
- Unprimed wood
Remove all loose dirt as well as any scaly or powdery material.* All metal, including nail heads, should be primed with a metal primer. Both UGL® 222 Spackling Paste and the surface temperature of the area to be patched must be above 50°F.
All exterior applications must be painted.
Apply UGL® 222 Spackling Paste with a putty knife or a broad knife. Fill deep cracks in two steps, allowing the material to dry thoroughly between applications. To patch sand-finish plaster, add white sand to match the texture of the adjoining area. UGL® 222 Spackling Paste can be painted over immediately after drying with any type of decorative finish.
USAGE STATEMENT: Prior to use, carefully read the product label and follow the directions. For technical information, warnings, cautions, notices, and additional information, download and read the documentation available on this website.
California Residents: Prop 65 WARNING(S)
* WARNING: If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1 – 800-424-LEAD or visit www.epa.gov/lead